Upstream

Course description: Water flooding has long been proven as the simplest and the lowest cost approach to maintaining production and increasing oil recovery from an oil reservoir. However, these benefits may fall far short of the expectations unless the time-tested concepts and practices are clearly understood and judiciously implemented. These concepts and practices aim at […]

Course description: The course emphasizes the practical application of well test theory to the solution of real well testing problems from design through interpretation for oil, gas and water injection wells. Participants will be introduced to a systematic approach to well test analysis and will apply it using modern well test analysis software. Numerous data […]

Course Description: This 5-day course presents important material-balance techniques to analyze reservoir performance. The course covers the full scope of reservoir producing mechanisms: solution-gas drives, gas-cap drives, gas drives, water drives, and compaction drives. Attendees learn a mechanistic and physical understanding of the factors affecting fluid production. The course also covers the full spectrum of […]

Course description: This course blends lecture, hands-on exercises, and seminar teaching styles to enhance learning. Participants work with software that allows them to design and analyze artificial lift designs. Such programs should improve performance and result in higher production rates and/or reduced operating costs. Participants learn how to design and troubleshoot rod pumping, continuous gas […]

Course description Well Design and Engineering integrates all major well design technologies from pre-spud to TD. Participants are actively engaged in every aspect of the technical activities required to deliver a cost-effective well plan while also gaining valuable perspective on how the overall process should be managed in a dynamic team environment. The workshop content […]

Course description The main objectives of this introductory course are: 1) To introduce the fundamental geophysical investigation techniques and the use of the proper geophysical application for specific projects; 2) To introduce students to geophysical data collection methods; 3) To introduce geopysical data analyses and interpretations.   After successfully completing this course, delegates should be […]

Course Overview and Description: The course provides an overview of the factors which influence the operations of intelligent wells, analysis of completion design process, and a fundamental explanation of IWC performance optimization. The course will help engineers avoid improper design of an intelligent well system where any one component, or a mismatch of components, adversely […]

Overview: Comprehensive description of the basics and fundamentals of Intelligent Well Completion needed to successfully identify, plan and execute intelligent well and intelligent field projects.  Presentation material is combined with practical exercises to reinforce the material learned. Duration: 5 days   Course Content Part I: Introduction to Intelligent Well completions, identifying, screening, and justifying Intelligent […]

Course Description PVT (Pressure-Volume-Temperature) represents the behavior of hydrocarbon reservoir fluids during the life of the field, as well as effect of changes in temperature and and pressure during fluid transfer from reservoir to surface/processing facilities. This course will focus on studying the phase behavior of hydrocarbon systems as related to petroleum recovery. The Ideal […]

Description Well logging, although implement various principles in practice, but basically is dedicated to one common goal to measure certain physical parameters of rocks being drilled continuously in order to get interested information concerning the formation, their porosity, permeability and the nature of containing fluids. With the recent trend to build an effective synergy in […]

Course Description Formation damage seems to be inevitable and it is costing your company money! Whether formation damage can be prevented, removed economically, or must be accepted as the price for drilling and producing a well will depend upon many factors. Concerns for formation damage have been with our industry from the early days. These […]

Course Description The most universal, comprehensive and concise descriptive documents on oil and gas wells are logs. They impact the work of almost every oilfield group from geologists to roustabouts to bankers. Familiarity with the purposes and optimum applications of well logs is therefore essential for people forging their careers in the oil business   Course […]

Course Description To provide operations, production, and reservoir engineers with the newest and most accurate methods for obtaining values of reservoir fluid properties from laboratory data and correlations, along with a better understanding of the relationships between the five reservoir fluids. Following completion of this course, all participants should be able to manage problems concerning […]

Course Description This course takes a comprehensive look at several aspects of improved oil recovery. Various techniques are described and case studies presented. Course Duration : 5 days COURSE CONTENT Reservoir life cycle and recovery process Life under primary recovery phase: Recovery targets and ways to improve Life under secondary recovery phases: Immiscible gas injection, […]

Course Description Predict the rate at which a well should be capable of producing, given reservoir and fluid properties, wellbore configuration, and flowing wellhead pressure. Identify which components of the reservoir/completion/wellbore system are restricting performances; analyze production data to find permeability, skin factor, and drainage area; forecast future performance from historical production trends and from […]

Course Description: The course is designed to give to Non-Production Engineers the basic knowledge on Production Engineering, in order to improve their communication among the asset team members. Overview of Production Engineering, Reservoir fundamentals, Well Testing, Nodal analysis, Lower and Upper Completions, Perforations, Completion Fluids, Multilaterals, Well Completion Equipment (tubing, packers, safety valves, etc), Production […]

Course Description: Covers the basics of acceptable planning, techniques, and equipment for completion and stimulation of newly cased wells; also covers planning, organizing, and supervising remedial and recompletion operations on old wells. Course Duration : 5 days Course Content Participants receive instruction in Planning the job Pipe recovery Fishing Wireline operations Selection of downhole equipment […]

Course Content Participants receive instruction in Reservoir fundamentals Natural drive mechanisms Artificial lift mechanisms Enhanced recovery Wellhead equipment Offshore production—special considerations Production operations practices Separation Treating liquids Treating gas Measuring liquids and gases Produced water management and disposal Lease automation and emergency shutdown Oil and gas corrosion   Course Duration : 5 days Recommended For […]

Course Content: Participants receive instruction in, Natural gas chemistry Physical properties Gas laws Vapor/liquid equilibrium Phase behavior Production—introduction Gas handling process selection Overview of gas production handling Field systems > Separators > Gathering lines > Hydrates > Dehydration > Compressors & prime movers > Instruments & controls > Measurement > Gas conditioning Natural gas processing […]

Course description This course is targeted to provide a simple explanation of some physical principles of drilling operation. The course also presents the most usable mathematical equations in this field, which is highly important in well control situation. Course duration: 5 days   Course content: Upon completion of this course the participant will have good […]

Course description: The drilling optimization course focusing on stuck pipe prevention enables well operations professionals to better understand causes of stuck pipe and apply effective techniques to reduce or eliminate stuck pipe. The aim of the course is to reduce incidents and related costs of the drilling process by preventing stuck pipe incidents. Stuck pipe is currently one of the […]

Course Contents: This interactive workshop engages students in simulated well control situations designed to enhance problem-solving skills critical to well control operations. Using drilling simulators, students will demonstrate their knowledge and understanding of various well control techniques and methods by successfully performing the procedures for various well control scenarios. This workshop, developed to augment the […]

Course Description: This course is designed to address the understanding of well control techniques to drillers or supervisor levels to meet the International Association of Drilling Contractors standards. The course provides practical well control skills by presenting the most commonly used well control techniques through hands-on simulation exercises.   Duration: 3-5 days   Course Contents: […]

Course Description: This is an introductory course, level 2, (1-3 days) designed to give potential well control certification candidates an awareness of well control theory, practices and equipment as a preparation prior to taking levels 3 & 4. This course can be either combined or given separately. Duration: 1-3 Days Course Contents: Upon completion of this course the […]

Course description:  This course is targeted to provide good understanding and appreciation the basic concepts of drilling process and design features of drilling rigs and the drilling rig system and summaries how each system operates, and the routine drilling operation procedures. Then we will explain the main drilling program including the specific knowledge of Drilling […]

Course Description: The course covers petroleum industry terminology, equipment usage, and operating procedures from upstream to downstream. Course Duration : 5 days Course Content Participants receive instruction in Petroleum geology and exploration Aspects of leasing Drilling operations Well control Production Transport of petroleum—offshore and onshore Refining and processing Macro-economic outlook for the upstream oil and […]

Description: This course covers the basic wellbore logging and interpretation. The course starts with an overview of basic drilling operations and completions. This will be followed by a comprehensive overview of formation evaluation and the appropriate applications or tools used to meet its objective. By the end of the course participants will have the opportunity […]

Course Description: This introductory course gives an overview of drilling and well operations, drilling systems and challenges in the drilling industry. It will provide the participants with a basic understanding of drilling and well technology and terminology. Duration: 3 days Course Content general knowledge of drilling and well operations throughout a well’s lifetime perspective Drilling […]

Introduction to Petroleum Engineering

Ref Group Course Name Course Date Instructor Fees Location Register
Water Flooding A to Z Register
Well Test Design and Analysis Register
Basic Reservoir Engineering Register
Artificial Lift Systems Register
Advanced Well Design and Drilling Engineering Register
Basics of GEOPHYSICS Register
Advanced Analysis and Optimization of Intelligent Well System Register
Intelligent Well Completion Technology Register
PVT AND PHASE BEHAVIOR OF RESERVOIR FLUIDS Register
Logging Methods & Formation Evaluation Register
Formation Damage: Causes, Prevention, and Remediation Register
Advanced Well Log Interpretation Register
Advanced Petroleum Reservoir Fluids Analysis Register
Improved Oil Recovery Methods: Theory and Applications Register
Advanced Production Data Analysis / Nodal Analysis Register
Production Engineering for Non-Production Engineers Register
Completion and Workover Register
 ,  Production Technology Register
Natural Gas Engineering Register
Basic Rig Mathematics 300 Dollar Dammam, Saudi Arabia Register
 ,  Stuck Pipe Prevention Register
Simulator DS-20 Workshop Register
Drilling Well Control IADC Well Cap Course Supervisor and Fundamental / Driller Level certificates Register
Introduction to Well Control Register
Basic Oil Well Drilling Technology Register
Petroleum Fundamentals Register
Basic Well Logging For Oil & Gas Professionals Register
Introduction to Drilling and Well Operation Register
Introduction to Petroleum Engineering Register